Self Loading Concrete and All Purpose Innovation from Todd Struckell
As an ex-farmer, cattle station owner and rural contractor, the multi purpose self loading Bull Mixa concept was invented simply because there was no tool for people on the land, or for building anywhere remote:
- The big concrete trucks were to much at once, and clumsy as you would still have to use a wheel barrow
- The little hand mixer is inefficient for most jobs out of town, being too small plus all the effort of using wheel barrows and shovels
- Most of the farmers, stations owners and builders out of town are short handed a lot of the time, so this machine, the Bull Mixa gives them the independence they deserve to tackle big jobs efficiently, and a effectively when they wanted to, with out the fuss
Uses of The Concrete and All Purpose Self Loading Mixer
The Bull Mixa makes mixing easier and faster. Some applications include:
- Cement mixers/Concrete mixers
- Feed mixers
- Fodder mixers
- Grain mixers
- Mulch mixers
- Stockfeed mixers
How does the Bull Mixa work?
- Bull Mixa Self-Loading mixers are very easy to operate, even by relatively unskilled operators
- For bulk mixing, push into material, (premix, sand pile, etc) once, add required amount of cement powder, push into material again and weigh off using a weighing device such as a Loadright weighing device or an oil pressure gauge to suit your machine
- Mix dry for a minute then add water directly to the back of the bowl
- For larger jobs it's best to use a high pressure hose (firehose, or pressure pump equipped with a water meter) for more accurate mixing
- The mixer is also equipped with variable speed forward and reverse as well as a safety stop
- This allows greater control when reversing the mixed load into piers or fence post holes etc
- The mixer bowl is equipped with inner spirals for better control when reversing
Why Choose The Bull Mixa Concrete and All Purpose Self Loading Mixer?
- Sizes: Bull Mixa mixers come in a variety of sizes: from a massive 2m bowl to a bobcat sized .2m.
- Fitted To All 3 Point Linkages: Bull Mixa Self loading mixers can be quickly and easily attached to all front end loaders, tractors, excavators, backhoes, bobcats or any 3 point linkage with hydraulic remotes.The average Bull Mixa Self-loading mixer (eg: .4m) only requires 6 - 8 gallons of oil to drive the bowl, therefore even a moderately sized loader will have ample capacity to operate the mixer.
- Quality Construction: Only quality materials are used throughout the construction, with the mechanical parts readily available from leading spare-parts stores.Australian Safety Standards approved.Equipped with variable speeds for forward and reverse with safety stop, and inner spirals for greater control for mixing and reversing.
- Custom Made Option: Bull Mixa Self loading mixers can even be custom made to your specifications.